Water Cooled Capacitors ( Medium Frequency )

We are Manufacturer, Supplier, Exporter of Water Cooled Capacitors, Medium Voltage, Medium Frequency Capacitors, MV Capacitor and our setup is situated in Sangli, Maharashtra, India.

Water Cooled Capacitors ( Medium Frequency ) requestaquote

General Information

‘Magnewin’ make water cooled capacitors are manufactured in state of art manufacturing facility situated at Sangli, Maharashtra, India.

Ratings

  • Voltage: 250 Volts to 5kV
  • Output Capacity: Single Capacitor rating up to 10000 kVAr
  • Frequency: Up to 35 kHz
  • Mounting: Suitable for both Horizontal / Vertical mounting
  • Container Material: Aluminium sheet.
  • Capacitors are confined to Indoor use.
  • Capacitor units can be dead casing or live casing construction.

Applicable Standards

  • IEC 60110-1 Capacitors for Induction Heating & Melting application
  • IS 9251 Capacitors for inductive heat generating plants operating at frequencies between 40 and 24000 Hz
  • DIN EN 60110-1 Power Capacitor for Induction Heating Installations.
  • VDE 05650-9:1999-09

Manufacturing and Quality Control

Imported bi-axially oriented double side hazy Polypropylene film is used as dielectric and 99.9% pure Aluminium foil is used as conductor in making of capacitors.
Winding of the element is carried out on a modern semi-automatic winding machine, in a class 100 environment. With extended foil design, with edge and end folding of aluminium foil, over voltage stress at the edges of the buried foil area is avoided. This also improves Partial Discharge Inception Voltage Value.
To identify weak spots / pin holes in the Polypropylene film, each element is tested with DC voltage in dry pressed conditions. Numbers of elements are interconnected in series – parallel combination depending on kVAr and Voltage rating of the Capacitor, with the help of modern soldering process.
The dry pack is wrapped with several layers of high quality insulating paper before inserting it into a pre treated / degreased Aluminium Container and the Top lid is welded by semiautomatic Pulse TIG welding machine.
The Aluminium Sheet used for fabricating containers manufactured of a special alloy. All metal parts of copper and brass are silver brazed to ensure homogeneous joint.
Porcelain bushings of desired BIL are fitted on the lid ensuring leakproofness. The metal parts of terminals are manufactured from extruded brass. The water cooling pipe is of 99.99% pure of adequate thickness electrolytic grade annealed copper and pressure tested for leaks before fitting on the pack. Number of Taps equal / unequal outputs can be provided as per Customer’s requirement. On specific request of client, imported over pressure switches are also fitted on the Capacitors.
All the terminal connections are tightened with torque wrench. The capacitors are then loaded in a PLC controlled autoclave for uniform heating and drying under vacuum for adequate period. After confirming the quality of drying by precision online monitoring instruments, Capacitors are then impregnated under vacuum with highly purified and degassed Non-Toxic non PCB impregnant. The capacitors are then subjected to all routine tests in accordance to IEC-60110-1.

Tests

Each and every Capacitor is subjected to Routine tests in accordance to IEC 60110-1.

  • Measurement of Capacitance.
  • Measurement of Dielectric Loss angle @ 50Hz.
  • Voltage test between terminals
  • Voltage test between terminals & container
  • Sealing Test
  • Safety - Over pressure dis-connector provided with normally closed contact

Features

  • Dielectric and Electrode
    Imported bi-axially oriented Both side hazy Polypropylene Film is used with Non-PCB environmental friendly impregnant as Dielectric. 99.9% soft annealed Aluminium foil of adequate thickness with edge folding and end folding is used as Electrode.
  • Dielectric losses
    Dielectric losses at 50oC at the time of initial energisation are approximate :-
    - 0.2 to 0.3 watts/kVAr upto frequency of 5 kHz.
    - 0.5 watts/kVAr for frequency above 5 kHz.
    Losses reduced after 500 operating hours to a suitable low value.

Note: Product improvement is a continuous process. For the latest information and special applications, please contact us