Low Inductance Capacitors

We are Manufacturer, Supplier, Exporter of Low Inductance Capacitors, Energy Storage Capacitors, Pulse Discharge Capacitors, LV MV HV, Low, Medium And High Voltage Capacitors and our setup is situated in Sangli, Maharashtra, India.

Energy Surge Capacitor
Energy Surge Capacitor
Request Quote

General Information

‘Magnewin’ make Energy Storage Capacitors are manufactured in state of art manufacturing facility situated at Sangli, Maharashtra, India.

Applicable Standards

IEC 61071and IS 13666
Capacitors in accordance with other standards / against specifications can be manufactured upon request


Features From To
Storage energy 250J 50 kJ
Rated DC voltage 2 kV 150 kV
Charging time and hold 1 second Several minutes
Peak current 200 A 500 kA
Duty Overdamped discharge Oscillatory discharge with reversal up to 80%
Repetition rate 1 discharge per sec 1 discharge per hour
Shot Life Few tens shots Several millions shots

Manufacturing and Quality Control

Imported bi-axially oriented double side hazy Polypropylene film is used as dielectric and 99.9% pure Aluminium foil is used as conductor in making of capacitors.
Winding of the element is carried out on a modern Automatic winding machine, in a class 100 environment. With extended foil design, with edge and end folding of aluminium foil, over voltage stress at the edges of the buried foil area is avoided. This also improves Partial Discharge Inception Voltage Value.
To identify weak spots / pin holes in the Polypropylene film, each element is tested with DC voltage in dry pressed conditions. Numbers of elements are interconnected in series – parallel combination depending on Voltage rating and energy of the Capacitor, with the help of modern soldering technique.
The dry pack is wrapped with several layers of high quality insulating paper before inserting it into a pre treated / degreased CRCA / Aluminium/Stainless Steel Container and the Top lid is welded by semiautomatic Pulse TIG welding machine. Bushings of desired BIL are fitted on the lid ensuring leakproofness. The metal parts of terminals are manufactured from extruded brass/Stainless Steel 304 Grade.
All the terminal connections are tightened with torque wrench. The capacitors are then loaded in a PLC controlled autoclave for uniform heating and drying under vacuum for adequate period. After confirming the quality of drying by precision online monitoring instruments, Capacitors are then impregnated under vacuum with highly purified and degassed Non-Toxic non PCB impregnant. The capacitors are then subjected to all routine tests in accordance to IS 13666/ IEC-61071 with latest amendments.


  • Defense
  • Pulse forming network
  • Medical equipments like Defibrillators
  • Cable fault locators
  • Impulse generators
  • Metal forming
  • Magnetizers / Demagnetizers
  • Laser
  • Plasma Research
  • Spot Welding
  • Thumper Capacitors
  • Filter Capacitors


  • Custom Built Design
  • World Class Raw Materials
  • Low inductance (ESL)
  • Low series resistance (ESR)
  • Volume Optimized and highly Reliable
  • Trouble free Long life performance
  • Environmental Friendly


Energy Storage Capacitors are classified into different categories depending on maximum peak current, repetition rate, working temperature, storage temperature, or inductance values.

Classification Based on Max. Peak Current

  • 1 Max. Peak Current 25 kA
  • 2 Max. Peak Current 50 kA
  • 3 Max. Peak Current 200 kA
  • 4 Max. Peak Current 500 kA

Classification Based on Repetition Rate

  • 1 Repetition - Rate - A Up to - 5 PPM
  • 2 Repetition - Rate - B Up to - 1 PPS
  • 3 Repetition - Rate - C Up to - 10 PPS
  • 4 Repetition - Rate - D Up to - 100 PPS
  • 5 Repetition - Rate - E Over - 100 PPS

Classification Based on ambient Temp.

  • 1 Category - L - 0 to 45° C
  • 2 Category - H - 0 to 50° C

Classification Based on Storage ambient Temp.

  • 1 Category - L1 - 0 to 70° C
  • 2 Category - H1 - 0 to 50° C

Classification Based on Inductance value

  • 1 Category 1 - 15 - to - 60 nH
  • 2 Category 2 - 61 - to - 150 nH
  • 3 Category 3 - above - 150 nH (Low Inductance Capacitors can also be supplied against specific requests.)

Temperature Range

Capacitors are designed for operation between -4°C to +55°C.


All the Capacitors are tested as per IS 13666/ IEC-61071 standards in our well-equipped in House Test Laboratory. Magnewin has developed the In-House test facility to carry out Inductance measurement, loss measurement on Schering bridge at 50 Hz.

Note: Product improvement is a continuous process. For the latest information and special applications, please contact us .